China
Applicable models: FinePix S2500HD / S2550HD / S2600HD / S2700HD
The firmware update (Ver.1.02 to Ver.1.04) incorporates the following issues:
1) Fixes an issue that caused unwanted number of sheets to be printed when using the "PictBridge" function. (For using PictBrige function, connection between the camera to the printer is required)
2) It improves the handling when playing back images.
The firmware update (Ver.1.00 to Ver.1.02) incorporates the following issues:
Applicable models: FinePix S1800 / S1850 / S1880 / S1900
The firmware update (Ver.1.02 to Ver.1.04) incorporates the following issues:
1) Fixes an issue that caused unwanted number of sheets to be printed when using the "PictBridge" function. (For using PictBrige function, connection between the camera to the printer is required)
2) It improves the handling when playing back images.
The firmware update (Ver.1.00 to Ver.1.02) incorporates the following issues:
Applicable models: FinePix S1600 / S1700 / S1730 / S1770 / S1780
The firmware update (Ver.1.02 to Ver.1.04) incorporates the following issues:
1) Fixes an issue that caused unwanted number of sheets to be printed when using the "PictBridge" function. (For using PictBrige function, connection between the camera to the printer is required)
2) It improves the handling when playing back images.
The firmware update (Ver.1.00 to Ver.1.02) incorporates the following issues:
Fujifilm have recently released a firmware update for the FinePix Real 3D-W1 camera that will allow it to be compatible with most 3D televisions.
The firmware can be download from here
Once the firmware has been updated, you are able to view photos and videos captured on your FinePix Real 3D-W1 camera on 3D ready TVs following these simple steps:
STEP1 : Update the firmware of W1 camera
STEP2 : Prepare HDPL-1 and HDMI cable
STEP3 : Connect HDPL-1 to 3D TV
Fujifilm has today issued a firmware upgrade for the recently launched FinePix HS10.
The upgrade will address a number of issues raised in consumer feedback since launch, and fine-tune the performance of the HS10.
Specific issues addressed are:
- Some pin-cushion distortion when using AE bracketing mode
- Occasional loss of detail
- In RAW + JPEG mode, JPEG images are sharper
- Improved sharpness and colour gradation in D-Range 200 and 400
To carry out the upgrade please download the firmware from:
